Romano S., Nezhadfar P.D., Shamsaei N., Seifi M., Beretta S.
High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness
(2020) Theoretical and Applied Fracture Mechanics, 106, art. no. 102477

Beretta S., Gargourimotlagh M., Foletti S., du Plessis A., Riccio M.
Fatigue strength assessment of “as built” AlSi10Mg manufactured by SLM with different build orientations
(2020) International Journal of Fatigue, 139, art. no. 105737

du Plessis A., Beretta S.
Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion
(2020) Additive Manufacturing, 35, art. no. 101424

Hamidi Nasab M., Romano S., Gastaldi D., Beretta S., Vedani M.
Combined effect of surface anomalies and volumetric defects on fatigue assessment of AlSi7Mg fabricated via laser powder bed fusion
(2020) Additive Manufacturing, 34, art. no. 100918

Marconi J., Riva E., Di Ronco M., Cazzulani G., Braghin F., Ruzzene M.
Experimental Observation of Nonreciprocal Band Gaps in a Space-Time-Modulated Beam Using a Shunted Piezoelectric Array
(2020) Physical Review Applied, 13, art. no. 31001

Finazzi V., Demir A.G., Biffi C.A., Migliavacca F., Petrini L., Previtali B.
Design and functional testing of a novel balloon-expandable cardiovascular stent in CoCr alloy produced by selective laser melting
(2020) Journal of Manufacturing Processes, 55, pp. 161-173

Riva E., Casieri V., Resta F., Braghin F.
Adiabatic pumping via avoided crossings in stiffness-modulated quasiperiodic beams
(2020) Physical Review B, 102, art. no. 14305

Hamidi Nasab M., Giussani A., Gastaldi D., Tirelli V., Vedani M.
Effect of surface and subsurface defects on fatigue behavior of AlSi10Mg alloy processed by laser powder bed fusion (L-PBF)
(2019) Metals, 9, art. no. 1063

Scaramuccia M.G., Caprio L., Tassa O., Previtali B.
Development of processing strategies for multigraded selective laser melting of Ti6Al4V and IN718
(2020) Powder Technology, 367, pp. 376-389

Gregori D., Scazzosi R., Nunes S.G., Amico S.C., Giglio M., Manes A.
Analytical and numerical modelling of high-velocity impact on multilayer alumina/aramid fiber composite ballistic shields: Improvement in modelling approaches
(2020) Composites Part B: Engineering, 187, art. no. 107830

Karimi H.R., Lu Y.
Guidance and control methodologies for marine vehicles: A survey
(2021) Control Engineering Practice, 111, art. no. 104785

Gao S., Chatterton S., Naldi L., Pennacchi P.
Ball bearing skidding and over-skidding in large-scale angular contact ball bearings: Nonlinear dynamic model with thermal effects and experimental results
(2021) Mechanical Systems and Signal Processing, 147, art. no. 107120

Pagani L., Grasso M., Scott P.J., Colosimo B.M.
Automated layerwise detection of geometrical distortions in laser powder bed fusion
(2020) Additive Manufacturing, 36, art. no. 101435

Esmaeili A., Ma D., Manes A., Oggioni T., Jiménez-Suárez A., Ureña A., Hamouda A.M.S., Sbarufatti C.
An experimental and numerical investigation of highly strong and tough epoxy based nanocomposite by addition of MWCNTs: Tensile and mode I fracture tests
(2020) Composite Structures, 252, art. no. 112692

Colosimo B.M., Cavalli S., Grasso M.
A cost model for the economic evaluation of in-situ monitoring tools in metal additive manufacturing
(2020) International Journal of Production Economics, 223, art. no. 107532

Riva E., Di Ronco M., Elabd A., Cazzulani G., Braghin F.
Non-reciprocal wave propagation in discretely modulated spatiotemporal plates
(2020) Journal of Sound and Vibration, 471, art. no. 115186

Yang D., Karimi H.R., Sun K.
Residual wide-kernel deep convolutional auto-encoder for intelligent rotating machinery fault diagnosis with limited samples
(2021) Neural Networks, 141, pp. 133-144

Caprio L., Demir A.G., Previtali B.
Observing molten pool surface oscillations during keyhole processing in laser powder bed fusion as a novel method to estimate the penetration depth
(2020) Additive Manufacturing, 36, art. no. 101470

De Ponti J.M., Colombi A., Riva E., Ardito R., Braghin F., Corigliano A., Craster R.V.
Experimental investigation of amplification, via a mechanical delay-line, in a rainbow-based metamaterial for energy harvesting
(2020) Applied Physics Letters, 117, art. no. 143902

Yang R., Yu Y., Sun J., Karimi H.R.
Event-based networked predictive control for networked control systems subject to two-channel delays
(2020) Information Sciences, 524, pp. 136-147

Beltrami R., Brusa P., Galassi C., Ardito R., Lecis N.
3D printing of fine alumina powders by binder jetting
(2021) Journal of the European Ceramic Society, 41, pp. 5307-5315

Vasileska E., Demir A.G., Colosimo B.M., Previtali B.
Layer-wise control of selective laser melting by means of inline melt pool area measurements
(2020) Journal of Laser Applications, 32, art. no. 22057

Zhang X., Zhou W., Karimi H.R., Sun Y.
Finite-and Fixed-Time Cluster Synchronization of Nonlinearly Coupled Delayed Neural Networks via Pinning Control
(2021) IEEE Transactions on Neural Networks and Learning Systems, 32, pp. 5222-5231

Casati R., Riccio M., Rizzi A., Kayacan M.Y., Vedani M.
Development of a novel high-temperature al alloy for laser powder bed fusion
(2021) Metals, 11, pp. 1-12

Abdelwahed M., Casati R., Bengtsson S., Larsson A., Riccio M., Vedani M.
Effects of powder atomisation on microstructural and mechanical behaviour of l-pbf processed steels
(2020) Metals, 10, pp. 1-21

Confalonieri C., Grimaldi A.T., Gariboldi E.
Ball-milled Al–Sn alloy as composite Phase Change Material
(2020) Materials Today Energy, 17, art. no. 100456

Boniotti L., Foletti S., Beretta S., Patriarca L.
Analysis of strain and stress concentrations in micro-lattice structures manufactured by SLM
(2020) Rapid Prototyping Journal, 26, pp. 370-380

Kwon Y.J., Casati R., Coduri M., Vedani M., Lee C.S.
Hydrogen embrittlement behavior of 18Ni 300 maraging steel produced by selective laser melting
(2019) Materials, 12, art. no. 2360

Cazzulani G., Silva A., Pennacchi P.
Optimization of continuous sensor placement for modal analysis: Application to an optical backscatter reflectometry strain sensor
(2021) Mechanical Systems and Signal Processing, 150, art. no. 107242

Wang Z., Fu J., Manes A.
Discrete fracture and size effect of aluminosilicate glass under flexural loading: Monte Carlo simulations and experimental validation
(2021) Theoretical and Applied Fracture Mechanics, 111, art. no. 102864

Bruzzo F., Catalano G., Demir A.G., Previtali B.
Surface finishing by laser re-melting applied to robotized laser metal deposition
(2021) Optics and Lasers in Engineering, 137, art. no. 106391

Donadello S., Finazzi V., Demir A.G., Previtali B.
Time-resolved quantification of plasma accumulation induced by multi-pulse laser ablation using self-mixing interferometry
(2020) Journal of Physics D: Applied Physics, 53, art. no. 495201

Xu L., Chatterton S., Pennacchi P., Liu C.
A tacholess order tracking method based on inverse short time fourier transform and singular value decomposition for bearing fault diagnosis
(2020) Sensors (Switzerland), 20, pp. 1-20

Platl J., Leitner H., Turk C., Demir A.G., Previtali B., Schnitzer R.
Defects in a Laser Powder Bed Fused Tool Steel
(2021) Advanced Engineering Materials, 23, art. no. 2000833

Goncharov I., Mariani D., De Gaudenzi G.P., Popovich A., Lecis N., Vedani M.
Mechanical and microstructural characterization of WC-Co consolidated by binder jetting additive manufacturing
(2021) International Journal of Refractory Metals and Hard Materials, 100, art. no. 105639

Beretta S.
More than 25 years of extreme value statistics for defects: Fundamentals, historical developments, recent applications
(2021) International Journal of Fatigue, 151, art. no. 106407

Zago M., Lecis N.F.M., Vedani M., Cristofolini I.
Dimensional and geometrical precision of parts produced by binder jetting process as affected by the anisotropic shrinkage on sintering
(2021) Additive Manufacturing, 43, art. no. 102007

Berardengo M., Manzoni S., Høgsberg J., Vanali M.
Vibration control with piezoelectric elements: The indirect measurement of the modal capacitance and coupling factor
(2021) Mechanical Systems and Signal Processing, 151, art. no. 107350

Casati R., Larini F., Riccio M., Vedani M.
Investigation on two Ti–B-reinforced Al alloys for Laser Powder Bed Fusion
(2021) Materials Science and Engineering A, 808, art. no. 140944

Casati R., Coduri M., Checchia S., Vedani M.
Insight into the effect of different thermal treatment routes on the microstructure of AlSi7Mg produced by laser powder bed fusion
(2021) Materials Characterization, 172, art. no. 110881

Vishwanath A.S., Rane K., Schaper J., Strano M., Casati R.
Rapid production of AZ91 Mg alloy by extrusion based additive manufacturing process
(2021) Powder Metallurgy, 64, pp. 370-377

Confalonieri C., Bassani P., Gariboldi E.
Microstructural and thermal response evolution of metallic form-stable phase change materials produced from ball-milled powders
(2020) Journal of Thermal Analysis and Calorimetry, 142, pp. 85-96

Lu Y., Karimi H.R.
Variance-constrained resilient H8 filtering for mobile robot localization under dynamic event-triggered communication mechanism
(2021) Asian Journal of Control, 23, pp. 2064-2078

Scazzosi R., Giglio M., Manes A.
Numerical simulation of high-velocity impact on fiber-reinforced composites using MAT_162
(2021) Material Design and Processing Communications, 3, art. no. e163

Huang C., Karimi H.R.
Non-fragile H8 control for LPV-based CACC systems subject to denial-of-service attacks
(2021) IET Control Theory and Applications, 15, pp. 1246-1256

Gavazzoni M., Boniotti L., Foletti S.
Influence of specimen size on the mechanical properties of microlattices obtained by selective laser melting
(2021) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235, pp. 1774-1787

Wang Z., Ma D., Suo T., Li Y., Manes A.
Investigation into different numerical methods in predicting the response of aluminosilicate glass under quasi-static and impact loading conditions
(2021) International Journal of Mechanical Sciences, 196, art. no. 106286

Quadrelli D.E., Craster R., Kadic M., Braghin F.
Elastic wave near-cloaking
(2021) Extreme Mechanics Letters, 44, art. no. 101262

Ma D., Campos Amico S., Giglio M., Manes A.
Effect of fibre bundle uncertainty on the tensile and shear behaviour of plain-woven composites
(2021) Composite Structures, 259, art. no. 113440

Biffi C.A., Tuissi A., Demir A.G.
Martensitic transformation, microstructure and functional behavior of thin-walled Nitinol produced by micro laser metal wire deposition
(2021) Journal of Materials Research and Technology, 12, pp. 2205-2215

Garavaglia M., Demir A.G., Zarini S., Victor B.M., Previtali B.
Fiber laser welding of AA 5754 in the double lap-joint configuration: process development, mechanical characterization, and monitoring
(2020) International Journal of Advanced Manufacturing Technology, 111, pp. 1643-1657

Sajedi Z., Casati R., Poletti M.C., Skalon M., Vedani M.
Thermal fatigue testing of laser powder bed fusion (L-PBF) processed AlSi7Mg alloy in presence of a quasi-static tensile load
(2020) Materials Science and Engineering A, 789, art. no. 139617

Palacios-Quiñonero F., Rubió-Massegú J., Rossell J.M., Karimi H.R.
Distributed passive actuation schemes for seismic protection of multibuilding systems
(2020) Applied Sciences (Switzerland), 10, art. no. 2383

Lorusso M., Rossoni M., Colombo G.
Conceptual modeling in product design within virtual reality environments
(2020) Computer-Aided Design and Applications, 18, pp. 383-398

Shi Y., Bordegoni M., Caruso G.
User studies by driving simulators in the era of automated vehicle
(2020) Computer-Aided Design and Applications, 18, pp. 211-226

Wei Y., Karimi H.R.
Dynamic sliding mode control for nonlinear parameter-varying systems
(2021) International Journal of Robust and Nonlinear Control, 31, pp. 8408-8419

Wang Z., Ren T., Suo T., Manes A.
Quasi-static and low-velocity impact biaxial flexural fracture of aluminosilicate glass — An experimental and numerical study
(2021) Thin-Walled Structures, 165, art. no. 107939

Askarpour M., Lestingi L., Longoni S., Iannacci N., Rossi M., Vicentini F.
Formally-based Model-Driven Development of Collaborative Robotic Applications
(2021) Journal of Intelligent and Robotic Systems: Theory and Applications, 102, art. no. 59

Ma D., Verleysen P., Chandran S., Giglio M., Manes A.
A modified peridynamic method to model the fracture behaviour of nanocomposites
(2021) Engineering Fracture Mechanics, 247, art. no. 107614

Li Z., Confalonieri C., Gariboldi E.
Numerical and experimental evaluation of thermal conductivity: An application to al-sn alloys
(2021) Metals, 11, art. no. 650

Scazzosi R., Giglio M., Manes A.
Experimental and numerical investigation on the perforation resistance of double-layered metal shields under high-velocity impact of soft-core projectiles
(2021) Engineering Structures, 228, art. no. 111467

Pennacchi P., Chatterton S., Vania A., Massocchi D.
Definition of damage indices for railway axle bearings: Results of long-lasting tests
(2021) Machines, 9, pp. 1-17

Rubió-Massegú J., Palacios-Quiñonero F., Rossell J.M., Karimi H.R.
A novel iterative linear matrix inequality design procedure for passive inter-substructure vibration control
(2020) Applied Sciences (Switzerland), 10, art. no. 5859

Gao S., Chatterton S., Pennacchi P., Han Q., Chu F.
Skidding and cage whirling of angular contact ball bearings: Kinematic-hertzian contact-thermal-elasto-hydrodynamic model with thermal expansion and experimental validation
(2022) Mechanical Systems and Signal Processing, 166, art. no. 108427

Gao S., Han Q., Zhou N., Pennacchi P., Chu F.
Stability and skidding behavior of spacecraft porous oil-containing polyimide cages based on high-speed photography technology
(2022) Tribology International, 165, art. no. 107294

Lu Y., Karimi H.R.
Recursive fusion estimation for mobile robot localization under multiple energy harvesting sensors
(2022) IET Control Theory and Applications, 16, pp. 20-30

Lorusso M., Rossoni M., Carulli M., Bordegoni M., Colombo G.
A virtual reality application for 3D sketching in conceptual design
(2022) Computer-Aided Design and Applications, 19, pp. 256-268

Guaglione F., Caprio L., Previtali B., Demir A.G.
Single point exposure LPBF for the production of biodegradable Zn-alloy lattice structures
(2021) Additive Manufacturing, 48, art. no. 102426

Wan H., Karimi H.R., Luan X., Liu F.
Self-triggered finite-time H8 control for Markov jump systems with multiple frequency ranges performance
(2021) Information Sciences, 581, pp. 694-710

De Ponti J.M., Riva E., Braghin F., Ardito R.
Elastic three-dimensional metaframe for selective wave filtering and polarization control
(2021) Applied Physics Letters, 119, art. no. 211903

Abdelwahed M., Bengtsson S., Casati R., Larsson A., Petrella S., Vedani M.
Effect of water atomization on properties of type 4130 steel processed by L-PBF
(2021) Materials and Design, 210, art. no. 110085

Confalonieri C., Gariboldi E.
Al-Sn Miscibility Gap Alloy produced by Power Bed Laser Melting for application as Phase Change Material
(2021) Journal of Alloys and Compounds, 881, art. no. 160596

De Ponti J.M., Iorio L., Riva E., Braghin F., Corigliano A., Ardito R.
Enhanced Energy Harvesting of Flexural Waves in Elastic Beams by Bending Mode of Graded Resonators
(2021) Frontiers in Materials, 8, art. no. 745141

Lecis N., Beltrami R., Emanuelli L., Casati R., Vedani M., Molinari A.
Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting
(2021) Materials Science and Engineering A, 828, art. no. 142108

Patriarca L., Abuzaid W., Carlucci G., Casati R.
Pseudoelasticity in FeMnNiAl shape memory alloy lattice structures produced by Laser Powder Bed Fusion
(2021) Materials Letters, 302, art. no. 130349

Ma D., González-Jiménez Á., Giglio M., dos Santos Cougo C.M., Amico S.C., Manes A.
Multiscale modelling approach for simulating low velocity impact tests of aramid-epoxy composite with nanofillers
(2021) European Journal of Mechanics, A/Solids, 90, art. no. 104286

Berardengo M., Manzoni S., Thomas O., Vanali M.
Guidelines for the layout and tuning of piezoelectric resonant shunt with negative capacitances in terms of dynamic compliance, mobility and accelerance
(2021) Journal of Intelligent Material Systems and Structures, 32, pp. 2092-2107

De Ponti J.M., Iorio L., Riva E., Ardito R., Braghin F., Corigliano A.
Selective Mode Conversion and Rainbow Trapping via Graded Elastic Waveguides
(2021) Physical Review Applied, 16, art. no. 34028

Scarpellini A., Finazzi V., Schito P., Bionda A., Ratti A., Demir A.G.
Laser powder bed fusion of a topology optimized and surface textured rudder bulb with lightweight and drag-reducing design
(2021) Journal of Marine Science and Engineering, 9, art. no. 1032

Li Z., Gariboldi E.
Modelling the conditions for natural convection onset in open-cell porous Al/paraffin composite phase change materials: Effects of temperature, paraffin type and metallic structure geometry
(2021) International Journal of Heat and Mass Transfer, 173, art. no. 121279

Lecis N., Beltrami R., Mariani M.
Binder jetting 3D printing of 316 stainless steel: Influence of process parameters on microstructural and mechanical properties
(2021) Metallurgia Italiana, 113, pp. 31-41

Caprio L., Demir A.G., Previtali B.
Nonintrusive estimation of subsurface geometrical attributes of the melt pool through the sensing of surface oscillations in laser powder bed fusion
(2021) Journal of Laser Applications, 33, art. no. 12035

Petrò S., Moroni G.
Statistics-based decision rules for the ISO 10360 series of standard tests
(2021) CIRP Annals, 70, pp. 423-426

Shi Y., Azzolin N., Picardi A., Zhu T., Bordegoni M., Caruso G.
A virtual reality-based platform to validate hmi design for increasing user’s trust in autonomous vehicle
(2021) Computer-Aided Design and Applications, 18, pp. 502-518

Kuriakose S., Parenti P., Annoni M.
Micro extrusion of high aspect ratio bi-lumen tubes using 17-4PH stainless steel feedstock
(2020) Journal of Manufacturing Processes, 58, pp. 443-457

Quadrelli D.E., Riva E., Cazzulani G., Braghin F.
Omindirectional non-reciprocity via 2d modulated radial sonic crystals
(2020) Crystals, 10, pp. 1-12

Ma D., Elmahdy A., Verleysen P., Giglio M., Manes A.
A cohesive-based method to bridge the strain rate effect and defects of RTM-6 epoxy resin under tensile loading
(2020) Procedia Structural Integrity, 28, pp. 1193-1203

Rossoni M., Bolzan P., Colombo G., Bordegoni M., Carulli M.
Survey of digital tools for the generation of ideas
(2020) Proceedings of the ASME Design Engineering Technical Conference, 9, art. no. V009T09A066

Sajedi Z., Casati R., Poletti M.C., Skalon M., Sommitsch C., Vedani M.
Thermo-mechanical fatigue behaviour of AlSi7Mg alloy processed by selective laser melting
(2019) Euro PM 2019 Congress and Exhibition,

Galbusera F., Demir A.G., Platl J., Turk C., Schnitzer R., Previtali B.
Processability and cracking behaviour of novel high-alloyed tool steels processed by Laser Powder Bed Fusion
(2022) Journal of Materials Processing Technology, 302, art. no. 117435

Gao S., Han Q., Zhou N., Pennacchi P., Chatterton S., Qing T., Zhang J., Chu F.
Experimental and theoretical approaches for determining cage motion dynamic characteristics of angular contact ball bearings considering whirling and overall skidding behaviors
(2022) Mechanical Systems and Signal Processing, 168, art. no. 108704

Zong G., Wang Y., Karimi H.R., Shi K.
Observer-based adaptive neural tracking control for a class of nonlinear systems with prescribed performance and input dead-zone constraints
(2022) Neural Networks, 147, pp. 126-135

Demir A.G., Kim J., Caltanissetta F., Hart A.J., Tasan C.C., Previtali B., Colosimo B.M.
Enabling multi-material gradient structure in laser powder bed fusion
(2022) Journal of Materials Processing Technology, 301, art. no. 117439

Platl J., Bodner S., Hofer C., Landefeld A., Leitner H., Turk C., Nielsen M.-A., Demir A.G., Previtali B., Keckes J., Schnitzer R.
Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
(2022) Acta Materialia, 225, art. no. 117570

Kanyilmaz A., Demir A.G., Chierici M., Berto F., Gardner L., Kandukuri S.Y., Kassabian P., Kinoshita T., Laurenti A., Paoletti I., du Plessis A., Razavi S.M.J.
Role of metal 3D printing to increase quality and resource-efficiency in the construction sector
(2022) Additive Manufacturing, 50, art. no. 102541

Pourheidar A., Patriarca L., Madia M., Werner T., Beretta S.
Progress in the measurement of the cyclic R-curve and its application to fatigue assessment
(2022) Engineering Fracture Mechanics, 260, art. no. 108122

Scazzosi R., Brejão de Souza S.D., Amico S.C., Giglio M., Manes A.
Experimental and numerical evaluation of the perforation resistance of multi-layered alumina/aramid fiber ballistic shield impacted by an armor piercing projectile
(2022) Composites Part B: Engineering, 230, art. no. 109488

Romano T., Migliori E., Mariani M., Lecis N., Vedani M.
Densification behaviour of pure copper processed through cold pressing and binder jetting under different atmospheres
(2022) Rapid Prototyping Journal,

Karimi H.R., Wang N., Man Z.
Learning-based robust control methodologies under information constraints
(2022) International Journal of Robust and Nonlinear Control,

Yang D., Karimi H.R., Gelman L.
A Fuzzy Fusion Rotating Machinery Fault Diagnosis Framework Based on the Enhancement Deep Convolutional Neural Networks
(2022) Sensors, 22, art. no. 671

Kaljevic A., Demir A.G.
Influence of shielding gas flow on the µLMWD of biodegradable Mg alloy and permanent stainless steel for additive manufacturing of biomedical implants
(2022) International Journal of Advanced Manufacturing Technology,

Casati R., Vedani M.
Effect of Cu content on hot-crack resistance of Al-Cu-Mg alloys produced by laser powder bed fusion
(2022) Philosophical Magazine Letters,

Mastinu G., Solari L.
Electric and biomethane-fuelled urban buses: comparison of environmental performance of different powertrains
(2022) International Journal of Life Cycle Assessment,

Abdelwahed M., Casati R., Larsson A., Petrella S., Bengtsson S., Vedani M.
On the Recycling of Water Atomized Powder and the Effects on Properties of L-PBF Processed 4130 Low-Alloy Steel
(2022) Materials, 15, art. no. 336

Casati R., Vedani M., Volpp J.
Design and Characterization of Al–Mg–Si–Zr Alloys with Improved Laser Powder Bed Fusion Processability
(2022) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 53, pp. 331-343

Ballo F., Carboni M., Mastinu G., Previati G.
Wires for spring construction: full scale fatigue experimental tests
(2022) Meccanica, 57, pp. 213-228

Gavazzoni M., Foletti S., Pasini D.
Cyclic response of 3D printed metamaterials with soft cellular architecture: The interplay between as-built defects, material and geometric non-linearity
(2022) Journal of the Mechanics and Physics of Solids, 158, art. no. 104688

Xiao H., Zhu Q., Karimi H.R.
Stability of stochastic delay switched neural networks with all unstable subsystems: A multiple discretized Lyapunov-Krasovskii functionals method
(2022) Information Sciences, 582, pp. 302-315

Wang Z., Suo T., Manes A.
Effect of chemical strengthening residual stress on the flexural performance and fracture behavior of aluminosilicate glass
(2021) Engineering Fracture Mechanics, 258, art. no. 108104

Lima R.A.A., Perrone R., Carboni M., Bernasconi A.
Experimental analysis of mode I crack propagation in adhesively bonded joints by optical backscatter reflectometry and comparison with digital image correlation
(2021) Theoretical and Applied Fracture Mechanics, 116, art. no. 103117

Gavazzoni M., Pisati M., Beretta S., Foletti S.
Multiaxial static strength of a 3D printed metallic lattice structure exhibiting brittle behavior
(2021) Fatigue and Fracture of Engineering Materials and Structures, 44, pp. 3499-3516

Mombelli D., Gonçalves D.L., Mapelli C., Barella S., Gruttadauria A.
Processing and Characterization of Self-Reducing Briquettes Made of Jarosite and Blast Furnace Sludges
(2021) Journal of Sustainable Metallurgy, 7, pp. 1603-1626

Li Z., Gariboldi E.
On the use of effective thermophysical properties to predict the melting process of composite phase change materials with coarse structures
(2021) International Journal of Heat and Mass Transfer, 180, art. no. 121765

Martulli L.M., Barriga Ruiz P., Rajan A., Bárnik F., Sága M., Bernasconi A.
Infill shape effects on bending stiffness of additively manufactured short fibre reinforced polymer sandwich specimens
(2021) Journal of Reinforced Plastics and Composites, 40, pp. 927-938

Vescovini A., Balen L., Scazzosi R., da Silva A.A.X., Amico S.C., Giglio M., Manes A.
Numerical investigation on the hybridization effect in inter-ply S2-glass and aramid woven composites subjected to ballistic impacts
(2021) Composite Structures, 276, art. no. 114506

Massocchi D., Riboni G., Lecis N., Chatterton S., Pennacchi P.
Tribological Characterization of Polyether Ether Ketone (PEEK) Polymers Produced by Additive Manufacturing for Hydrodynamic Bearing Application
(2021) Lubricants, 9, art. no. 112

Belloli F., Demir A.G., Previtali B.
Understanding the deformation mechanisms of horizontal internal channels during the LPBF of 18Ni300 maraging steel
(2021) Journal of Manufacturing Processes, 71, pp. 237-248

Karimi H.R.
Editorial special issue on recent developments in deep neural networks for intelligent mechatronics
(2021) Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 235, pp. 1731-1732

Karimi H.R.
Guest Editorial: Special issue on recent technological innovations in automation and control systems for marine vehicles
(2021) Control Engineering Practice, 116, art. no. 104928

Sajedi Z., Casati R., Poletti M.C., Wang R., Iranshahi F., Vedani M.
Comparative thermal fatigue behavior of AlSi7Mg alloy produced by L-PBF and sand casting
(2021) International Journal of Fatigue, 152, art. no. 106424

Petrò S., Pagani L., Moroni G., Scott P.J.
Conformance and nonconformance in segmentation-free X-ray computed tomography geometric inspection
(2021) Precision Engineering, 72, pp. 25-40

Barricelli L., Beretta S.
Analysis of prospective SIF and shielding effect for cylindrical rough surfaces obtained by L-PBF
(2021) Engineering Fracture Mechanics, 256, art. no. 107983

Li B., Lu Y., Karimi H.R.
Adaptive fading extended kalman filtering for mobile robot localization using a doppler–azimuth radar
(2021) Electronics (Switzerland), 10, art. no. 2544

Bertolini M., Rossoni M., Colombo G.
Operative workflow from ct to 3d printing of the heart: Opportunities and challenges
(2021) Bioengineering, 8, art. no. 130

Pisati M., Corneo M.G., Beretta S., Riva E., Braghin F., Foletti S.
Numerical and experimental investigation of cumulative fatigue damage under random dynamic cyclic loads of lattice structures manufactured by laser powder bed fusion
(2021) Metals, 11, art. no. 1395

Gao S., Chatterton S., Pennacchi P., Chu F.
Behaviour of an angular contact ball bearing with three-dimensional cubic-like defect: A comprehensive non-linear dynamic model for predicting vibration response
(2021) Mechanism and Machine Theory, 163, art. no. 104376

Bertoli L., Caltanissetta F., Colosimo B.M.
In-situ Quality Monitoring of Extrusion-based Additive Manufacturing via Random Forests and clustering
(2021) IEEE International Conference on Automation Science and Engineering, 2021-August, pp. 2057-2062

Berardengo M., Manzoni S., Thomas O., Giraud-Audine C., Drago L., Marelli S., Vanali M.
The reduction of operational amplifier electrical outputs to improve piezoelectric shunts with negative capacitance
(2021) Journal of Sound and Vibration, 506, art. no. 116163

Carasi G., Yu B., Hutten E., Zurob H., Casati R., Vedani M.
Effect of Heat Treatment on Microstructure Evolution of X38CrMoV5-1 Hot-Work Tool Steel Produced by L-PBF
(2021) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52, pp. 2564-2575

Cacace S., Semeraro Q.
Improvement of SLM Build Rate of A357 alloy by optimizing Fluence
(2021) Journal of Manufacturing Processes, 66, pp. 115-124

Yang D., Sun K.
A CAE-Based Deep Learning Methodology for Rotating Machinery Fault Diagnosis
(2021) 2021 7th International Conference on Control, Automation and Robotics, ICCAR 2021, -396

Volpp J., Casati R.
Fluctuations of tracks and layers during aluminium laser powder-bed fusion
(2021) Applied Sciences (Switzerland), 11, art. no. 3132

Petrò S., Reina C., Moroni G.
X-ray CT-Based Defect Evaluation of Continuous CFRP Additive Manufacturing
(2021) Journal of Nondestructive Evaluation, 40, art. no. 7

Arrigoni S., Braghin F., Cheli F.
MPC trajectory planner for autonomous driving solved by genetic algorithm technique
(2021) Vehicle System Dynamics,

Karimi H.R., Wang N., Jin X., Zemouche A.
Guest Editorial: Special issue on neural networks-based reinforcement learning control of autonomous systems
(2021) Neurocomputing,

Wang Z., Manes A.
Investigation of the biaxial flexural fracture of aluminosilicate glass by smeared fixed crack method
(2021) Procedia Structural Integrity, 33, pp. 337-346

Previati G., Gobbi M.
Test bench for characterization and durability tests of motorbike clutches
(2021) Proceedings of the ASME Design Engineering Technical Conference, 1, art. no. V001T01A013

Mei P., Karimi H.R., Yang S., Xu B., Huang C.
An adaptive fuzzy sliding-mode control for regenerative braking system of electric vehicles
(2021) International Journal of Adaptive Control and Signal Processing,

Cacace S., Semeraro Q.
Fast optimisation procedure for the selection of L-PBF parameters based on utility function
(2021) Virtual and Physical Prototyping,

Chatterton S., Pennacchi P., Vania A., Dang P.V.
Optimization of an oil film journal bearing for temperature reduction
(2021) Proceedings of the ASME Turbo Expo, 9A-2021, art. no. V09AT24A023

Yang D., Karimi H.R., Sun K.
CNN-based early classification of rotating machinery fault diagnosis
(2021) 17th International Conference on Condition Monitoring and Asset Management, CM 2021,

Li Z., Gariboldi E.
Analysis of the applicability of effective thermophysical properties to composite phase change materials
(2021) Materials Science Forum, 1016 MSF, pp. 813-818

Pennacchi P., Chatterton S., Vania A.
Diagnostics of Roller Bearings Faults During Long-Lasting Tests
(2021) Mechanisms and Machine Science, 91, pp. 687-698

Petrò S., Moroni G.
3D Identification of Face and Flank in Micro-mills for Automatic Measurement of Rake Angle
(2020) Nanomanufacturing and Metrology, 3, pp. 151-163

Zhang Z., Kong L., Niu Y., Liang Z.
Modification of gesture-determined-dynamic function with consideration of margins for motion planning of humanoid robots
(2020) Filomat, 34, pp. 5033-5048

Pigazzi R., Confalonieri C., Rossoni M., Gariboldi E., Colombo G.
Ontologies as a tool for design and material engineers
(2020) ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 6, art. no. 0

Pennacchi P., Cazzulani G., Silva A.
Modal analysis of turbine blades by means of distributed optical fiber sensors
(2020) Proceedings of the ASME Turbo Expo, 11, art. no. 0

Hamidi Nasab M., Loge R., Casati R., Boillat E., Vedani M.
A study on the surface features of the SLM processed parts and their journey to become bulk defects
(2019) Euro PM 2019 Congress and Exhibition,

Bengtsson S., Casati R., Larsson A., Riccio M., Abdelwahed M., Vedani M.
Design of structural low-alloy steels for laser-powder bed fusion
(2019) Euro PM 2019 Congress and Exhibition,

Deirmina F., Davies P.A., Casati R.
Effects of Powder Atomization Route and Post-Processing Thermal Treatments on the Mechanical Properties and Fatigue Resistance of Additively Manufactured 18Ni300 Maraging Steel
(2021) Advanced Engineering Materials,

Casati R., Coduri M., Riccio M., Rizzi A., Vedani M.
Development of a high strength Al–Zn–Si–Mg–Cu alloy for selective laser melting
(2019) Journal of Alloys and Compounds, 801, pp. 243-253

Oliveira de Menezes J.T., Castrodeza E.M., Casati R.
Effect of build orientation on fracture and tensile behavior of A357 Al alloy processed by Selective Laser Melting
(2019) Materials Science and Engineering A, 766, art. no. 138392

Bengtsson S., Casati R., Larsson A., Riccio M., Abdelwahed M., Vedani M.
Design of structural low-alloy steels for laser-powder bed fusion
(2019) Euro PM 2019 Congress and Exhibition,

Gariboldi E., Colombo L.P.M., Fagiani D., Li Z.
Methods to Characterize the Effective Thermal Conductivity, Diffusivity and Thermal Response in Different Classes of Composite Phase Change Materials
(2019) Materials, 12, art. no. 2552

Confalonieri C., Li Z., Gariboldi E.
Metallic form-stable phase change materials for thermal energy storage and management: general features and effect of manufacturing process on thermal response and stability
(2020) La Metallurgia Ital. Int J. Ilat. Assoc. Metall., 7, pp. 12-20

Li Z., Gariboldi E.
Reliable estimation of effective thermal properties of a 2-phase material by its optimized modelling in view of Lattice Monte Carlo simulation
(2019) Computational Materials Science, 169, art. no. 109125

Confalonieri C., Perrin M., Gariboldi E.
Combined powder metallurgy routes to improve thermal and mechanical response of Al-Sn composite Phase Change Materials
(2020) Trans. Nonferrous Met. Soc. China, 30, pp. 3226-3239

Romano S., Nezhadfar P.D., Shamsaei N., Seifi M., Beretta S.
High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: Effect of sub-surface porosity and surface roughness
(2020) Theoretical and Applied Fracture Mechanics, 106, art. no. 102477

Beretta S., Gargourimotlagh M., Foletti S., du Plessis A., Riccio M.
Fatigue strength assessment of “as built” AlSi10Mg manufactured by SLM with different build orientations
(2020) International Journal of Fatigue, 139, art. no. 105737

du Plessis A., Beretta S.
Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion
(2020) Additive Manufacturing, 35, art. no. 101424

Hamidi Nasab M., Romano S., Gastaldi D., Beretta S., Vedani M.
Combined effect of surface anomalies and volumetric defects on fatigue assessment of AlSi7Mg fabricated via laser powder bed fusion
(2020) Additive Manufacturing, 34, art. no. 100918

Marconi J., Riva E., Di Ronco M., Cazzulani G., Braghin F., Ruzzene M.
Experimental Observation of Nonreciprocal Band Gaps in a Space-Time-Modulated Beam Using a Shunted Piezoelectric Array
(2020) Physical Review Applied, 13, art. no. 31001

Finazzi V., Demir A.G., Biffi C.A., Migliavacca F., Petrini L., Previtali B.
Design and functional testing of a novel balloon-expandable cardiovascular stent in CoCr alloy produced by selective laser melting
(2020) Journal of Manufacturing Processes, 55, pp. 161-173

Riva E., Casieri V., Resta F., Braghin F.
Adiabatic pumping via avoided crossings in stiffness-modulated quasiperiodic beams
(2020) Physical Review B, 102, art. no. 14305

Hamidi Nasab M., Giussani A., Gastaldi D., Tirelli V., Vedani M.
Effect of surface and subsurface defects on fatigue behavior of AlSi10Mg alloy processed by laser powder bed fusion (L-PBF)
(2019) Metals, 9, art. no. 1063

Scaramuccia M.G., Caprio L., Tassa O., Previtali B.
Development of processing strategies for multigraded selective laser melting of Ti6Al4V and IN718
(2020) Powder Technology, 367, pp. 376-389

Gregori D., Scazzosi R., Nunes S.G., Amico S.C., Giglio M., Manes A.
Analytical and numerical modelling of high-velocity impact on multilayer alumina/aramid fiber composite ballistic shields: Improvement in modelling approaches
(2020) Composites Part B: Engineering, 187, art. no. 107830

Karimi H.R., Lu Y.
Guidance and control methodologies for marine vehicles: A survey
(2021) Control Engineering Practice, 111, art. no. 104785

Gao S., Chatterton S., Naldi L., Pennacchi P.
Ball bearing skidding and over-skidding in large-scale angular contact ball bearings: Nonlinear dynamic model with thermal effects and experimental results
(2021) Mechanical Systems and Signal Processing, 147, art. no. 107120

Pagani L., Grasso M., Scott P.J., Colosimo B.M.
Automated layerwise detection of geometrical distortions in laser powder bed fusion
(2020) Additive Manufacturing, 36, art. no. 101435

Esmaeili A., Ma D., Manes A., Oggioni T., Jiménez-Suárez A., Ureña A., Hamouda A.M.S., Sbarufatti C.
An experimental and numerical investigation of highly strong and tough epoxy based nanocomposite by addition of MWCNTs: Tensile and mode I fracture tests
(2020) Composite Structures, 252, art. no. 112692

Colosimo B.M., Cavalli S., Grasso M.
A cost model for the economic evaluation of in-situ monitoring tools in metal additive manufacturing
(2020) International Journal of Production Economics, 223, art. no. 107532

Riva E., Di Ronco M., Elabd A., Cazzulani G., Braghin F.
Non-reciprocal wave propagation in discretely modulated spatiotemporal plates
(2020) Journal of Sound and Vibration, 471, art. no. 115186

Yang D., Karimi H.R., Sun K.
Residual wide-kernel deep convolutional auto-encoder for intelligent rotating machinery fault diagnosis with limited samples
(2021) Neural Networks, 141, pp. 133-144

Caprio L., Demir A.G., Previtali B.
Observing molten pool surface oscillations during keyhole processing in laser powder bed fusion as a novel method to estimate the penetration depth
(2020) Additive Manufacturing, 36, art. no. 101470

De Ponti J.M., Colombi A., Riva E., Ardito R., Braghin F., Corigliano A., Craster R.V.
Experimental investigation of amplification, via a mechanical delay-line, in a rainbow-based metamaterial for energy harvesting
(2020) Applied Physics Letters, 117, art. no. 143902

Yang R., Yu Y., Sun J., Karimi H.R.
Event-based networked predictive control for networked control systems subject to two-channel delays
(2020) Information Sciences, 524, pp. 136-147

Beltrami R., Brusa P., Galassi C., Ardito R., Lecis N.
3D printing of fine alumina powders by binder jetting
(2021) Journal of the European Ceramic Society, 41, pp. 5307-5315

Vasileska E., Demir A.G., Colosimo B.M., Previtali B.
Layer-wise control of selective laser melting by means of inline melt pool area measurements
(2020) Journal of Laser Applications, 32, art. no. 22057

Zhang X., Zhou W., Karimi H.R., Sun Y.
Finite-and Fixed-Time Cluster Synchronization of Nonlinearly Coupled Delayed Neural Networks via Pinning Control
(2021) IEEE Transactions on Neural Networks and Learning Systems, 32, pp. 5222-5231

Casati R., Riccio M., Rizzi A., Kayacan M.Y., Vedani M.
Development of a novel high-temperature al alloy for laser powder bed fusion
(2021) Metals, 11, pp. 1-12

Abdelwahed M., Casati R., Bengtsson S., Larsson A., Riccio M., Vedani M.
Effects of powder atomisation on microstructural and mechanical behaviour of l-pbf processed steels
(2020) Metals, 10, pp. 1-21

Confalonieri C., Grimaldi A.T., Gariboldi E.
Ball-milled Al–Sn alloy as composite Phase Change Material
(2020) Materials Today Energy, 17, art. no. 100456

Boniotti L., Foletti S., Beretta S., Patriarca L.
Analysis of strain and stress concentrations in micro-lattice structures manufactured by SLM
(2020) Rapid Prototyping Journal, 26, pp. 370-380

Kwon Y.J., Casati R., Coduri M., Vedani M., Lee C.S.
Hydrogen embrittlement behavior of 18Ni 300 maraging steel produced by selective laser melting
(2019) Materials, 12, art. no. 2360

Cazzulani G., Silva A., Pennacchi P.
Optimization of continuous sensor placement for modal analysis: Application to an optical backscatter reflectometry strain sensor
(2021) Mechanical Systems and Signal Processing, 150, art. no. 107242

Wang Z., Fu J., Manes A.
Discrete fracture and size effect of aluminosilicate glass under flexural loading: Monte Carlo simulations and experimental validation
(2021) Theoretical and Applied Fracture Mechanics, 111, art. no. 102864

Bruzzo F., Catalano G., Demir A.G., Previtali B.
Surface finishing by laser re-melting applied to robotized laser metal deposition
(2021) Optics and Lasers in Engineering, 137, art. no. 106391

Donadello S., Finazzi V., Demir A.G., Previtali B.
Time-resolved quantification of plasma accumulation induced by multi-pulse laser ablation using self-mixing interferometry
(2020) Journal of Physics D: Applied Physics, 53, art. no. 495201

Xu L., Chatterton S., Pennacchi P., Liu C.
A tacholess order tracking method based on inverse short time fourier transform and singular value decomposition for bearing fault diagnosis
(2020) Sensors (Switzerland), 20, pp. 1-20

Platl J., Leitner H., Turk C., Demir A.G., Previtali B., Schnitzer R.
Defects in a Laser Powder Bed Fused Tool Steel
(2021) Advanced Engineering Materials, 23, art. no. 2000833

Goncharov I., Mariani D., De Gaudenzi G.P., Popovich A., Lecis N., Vedani M.
Mechanical and microstructural characterization of WC-Co consolidated by binder jetting additive manufacturing
(2021) International Journal of Refractory Metals and Hard Materials, 100, art. no. 105639

Beretta S.
More than 25 years of extreme value statistics for defects: Fundamentals, historical developments, recent applications
(2021) International Journal of Fatigue, 151, art. no. 106407

Zago M., Lecis N.F.M., Vedani M., Cristofolini I.
Dimensional and geometrical precision of parts produced by binder jetting process as affected by the anisotropic shrinkage on sintering
(2021) Additive Manufacturing, 43, art. no. 102007

Berardengo M., Manzoni S., Høgsberg J., Vanali M.
Vibration control with piezoelectric elements: The indirect measurement of the modal capacitance and coupling factor
(2021) Mechanical Systems and Signal Processing, 151, art. no. 107350

Casati R., Larini F., Riccio M., Vedani M.
Investigation on two Ti–B-reinforced Al alloys for Laser Powder Bed Fusion
(2021) Materials Science and Engineering A, 808, art. no. 140944

Casati R., Coduri M., Checchia S., Vedani M.
Insight into the effect of different thermal treatment routes on the microstructure of AlSi7Mg produced by laser powder bed fusion
(2021) Materials Characterization, 172, art. no. 110881

Vishwanath A.S., Rane K., Schaper J., Strano M., Casati R.
Rapid production of AZ91 Mg alloy by extrusion based additive manufacturing process
(2021) Powder Metallurgy, 64, pp. 370-377

Confalonieri C., Bassani P., Gariboldi E.
Microstructural and thermal response evolution of metallic form-stable phase change materials produced from ball-milled powders
(2020) Journal of Thermal Analysis and Calorimetry, 142, pp. 85-96

Lu Y., Karimi H.R.
Variance-constrained resilient H8 filtering for mobile robot localization under dynamic event-triggered communication mechanism
(2021) Asian Journal of Control, 23, pp. 2064-2078

Scazzosi R., Giglio M., Manes A.
Numerical simulation of high-velocity impact on fiber-reinforced composites using MAT_162
(2021) Material Design and Processing Communications, 3, art. no. e163

Huang C., Karimi H.R.
Non-fragile H8 control for LPV-based CACC systems subject to denial-of-service attacks
(2021) IET Control Theory and Applications, 15, pp. 1246-1256

Gavazzoni M., Boniotti L., Foletti S.
Influence of specimen size on the mechanical properties of microlattices obtained by selective laser melting
(2021) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235, pp. 1774-1787

Wang Z., Ma D., Suo T., Li Y., Manes A.
Investigation into different numerical methods in predicting the response of aluminosilicate glass under quasi-static and impact loading conditions
(2021) International Journal of Mechanical Sciences, 196, art. no. 106286

Quadrelli D.E., Craster R., Kadic M., Braghin F.
Elastic wave near-cloaking
(2021) Extreme Mechanics Letters, 44, art. no. 101262

Ma D., Campos Amico S., Giglio M., Manes A.
Effect of fibre bundle uncertainty on the tensile and shear behaviour of plain-woven composites
(2021) Composite Structures, 259, art. no. 113440

Biffi C.A., Tuissi A., Demir A.G.
Martensitic transformation, microstructure and functional behavior of thin-walled Nitinol produced by micro laser metal wire deposition
(2021) Journal of Materials Research and Technology, 12, pp. 2205-2215

Garavaglia M., Demir A.G., Zarini S., Victor B.M., Previtali B.
Fiber laser welding of AA 5754 in the double lap-joint configuration: process development, mechanical characterization, and monitoring
(2020) International Journal of Advanced Manufacturing Technology, 111, pp. 1643-1657

Sajedi Z., Casati R., Poletti M.C., Skalon M., Vedani M.
Thermal fatigue testing of laser powder bed fusion (L-PBF) processed AlSi7Mg alloy in presence of a quasi-static tensile load
(2020) Materials Science and Engineering A, 789, art. no. 139617

Palacios-Quiñonero F., Rubió-Massegú J., Rossell J.M., Karimi H.R.
Distributed passive actuation schemes for seismic protection of multibuilding systems
(2020) Applied Sciences (Switzerland), 10, art. no. 2383

Lorusso M., Rossoni M., Colombo G.
Conceptual modeling in product design within virtual reality environments
(2020) Computer-Aided Design and Applications, 18, pp. 383-398

Shi Y., Bordegoni M., Caruso G.
User studies by driving simulators in the era of automated vehicle
(2020) Computer-Aided Design and Applications, 18, pp. 211-226

Wei Y., Karimi H.R.
Dynamic sliding mode control for nonlinear parameter-varying systems
(2021) International Journal of Robust and Nonlinear Control, 31, pp. 8408-8419

Wang Z., Ren T., Suo T., Manes A.
Quasi-static and low-velocity impact biaxial flexural fracture of aluminosilicate glass — An experimental and numerical study
(2021) Thin-Walled Structures, 165, art. no. 107939

Askarpour M., Lestingi L., Longoni S., Iannacci N., Rossi M., Vicentini F.
Formally-based Model-Driven Development of Collaborative Robotic Applications
(2021) Journal of Intelligent and Robotic Systems: Theory and Applications, 102, art. no. 59

Ma D., Verleysen P., Chandran S., Giglio M., Manes A.
A modified peridynamic method to model the fracture behaviour of nanocomposites
(2021) Engineering Fracture Mechanics, 247, art. no. 107614

Li Z., Confalonieri C., Gariboldi E.
Numerical and experimental evaluation of thermal conductivity: An application to al-sn alloys
(2021) Metals, 11, art. no. 650

Scazzosi R., Giglio M., Manes A.
Experimental and numerical investigation on the perforation resistance of double-layered metal shields under high-velocity impact of soft-core projectiles
(2021) Engineering Structures, 228, art. no. 111467

Pennacchi P., Chatterton S., Vania A., Massocchi D.
Definition of damage indices for railway axle bearings: Results of long-lasting tests
(2021) Machines, 9, pp. 1-17

Rubió-Massegú J., Palacios-Quiñonero F., Rossell J.M., Karimi H.R.
A novel iterative linear matrix inequality design procedure for passive inter-substructure vibration control
(2020) Applied Sciences (Switzerland), 10, art. no. 5859

Gao S., Chatterton S., Pennacchi P., Han Q., Chu F.
Skidding and cage whirling of angular contact ball bearings: Kinematic-hertzian contact-thermal-elasto-hydrodynamic model with thermal expansion and experimental validation
(2022) Mechanical Systems and Signal Processing, 166, art. no. 108427

Gao S., Han Q., Zhou N., Pennacchi P., Chu F.
Stability and skidding behavior of spacecraft porous oil-containing polyimide cages based on high-speed photography technology
(2022) Tribology International, 165, art. no. 107294

Lu Y., Karimi H.R.
Recursive fusion estimation for mobile robot localization under multiple energy harvesting sensors
(2022) IET Control Theory and Applications, 16, pp. 20-30

Lorusso M., Rossoni M., Carulli M., Bordegoni M., Colombo G.
A virtual reality application for 3D sketching in conceptual design
(2022) Computer-Aided Design and Applications, 19, pp. 256-268

Guaglione F., Caprio L., Previtali B., Demir A.G.
Single point exposure LPBF for the production of biodegradable Zn-alloy lattice structures
(2021) Additive Manufacturing, 48, art. no. 102426

Wan H., Karimi H.R., Luan X., Liu F.
Self-triggered finite-time H8 control for Markov jump systems with multiple frequency ranges performance
(2021) Information Sciences, 581, pp. 694-710

De Ponti J.M., Riva E., Braghin F., Ardito R.
Elastic three-dimensional metaframe for selective wave filtering and polarization control
(2021) Applied Physics Letters, 119, art. no. 211903

Abdelwahed M., Bengtsson S., Casati R., Larsson A., Petrella S., Vedani M.
Effect of water atomization on properties of type 4130 steel processed by L-PBF
(2021) Materials and Design, 210, art. no. 110085

Confalonieri C., Gariboldi E.
Al-Sn Miscibility Gap Alloy produced by Power Bed Laser Melting for application as Phase Change Material
(2021) Journal of Alloys and Compounds, 881, art. no. 160596

De Ponti J.M., Iorio L., Riva E., Braghin F., Corigliano A., Ardito R.
Enhanced Energy Harvesting of Flexural Waves in Elastic Beams by Bending Mode of Graded Resonators
(2021) Frontiers in Materials, 8, art. no. 745141

Lecis N., Beltrami R., Emanuelli L., Casati R., Vedani M., Molinari A.
Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting
(2021) Materials Science and Engineering A, 828, art. no. 142108

Patriarca L., Abuzaid W., Carlucci G., Casati R.
Pseudoelasticity in FeMnNiAl shape memory alloy lattice structures produced by Laser Powder Bed Fusion
(2021) Materials Letters, 302, art. no. 130349

Ma D., González-Jiménez Á., Giglio M., dos Santos Cougo C.M., Amico S.C., Manes A.
Multiscale modelling approach for simulating low velocity impact tests of aramid-epoxy composite with nanofillers
(2021) European Journal of Mechanics, A/Solids, 90, art. no. 104286

Berardengo M., Manzoni S., Thomas O., Vanali M.
Guidelines for the layout and tuning of piezoelectric resonant shunt with negative capacitances in terms of dynamic compliance, mobility and accelerance
(2021) Journal of Intelligent Material Systems and Structures, 32, pp. 2092-2107

De Ponti J.M., Iorio L., Riva E., Ardito R., Braghin F., Corigliano A.
Selective Mode Conversion and Rainbow Trapping via Graded Elastic Waveguides
(2021) Physical Review Applied, 16, art. no. 34028

Scarpellini A., Finazzi V., Schito P., Bionda A., Ratti A., Demir A.G.
Laser powder bed fusion of a topology optimized and surface textured rudder bulb with lightweight and drag-reducing design
(2021) Journal of Marine Science and Engineering, 9, art. no. 1032

Li Z., Gariboldi E.
Modelling the conditions for natural convection onset in open-cell porous Al/paraffin composite phase change materials: Effects of temperature, paraffin type and metallic structure geometry
(2021) International Journal of Heat and Mass Transfer, 173, art. no. 121279

Lecis N., Beltrami R., Mariani M.
Binder jetting 3D printing of 316 stainless steel: Influence of process parameters on microstructural and mechanical properties
(2021) Metallurgia Italiana, 113, pp. 31-41

Caprio L., Demir A.G., Previtali B.
Nonintrusive estimation of subsurface geometrical attributes of the melt pool through the sensing of surface oscillations in laser powder bed fusion
(2021) Journal of Laser Applications, 33, art. no. 12035

Petrò S., Moroni G.
Statistics-based decision rules for the ISO 10360 series of standard tests
(2021) CIRP Annals, 70, pp. 423-426

Shi Y., Azzolin N., Picardi A., Zhu T., Bordegoni M., Caruso G.
A virtual reality-based platform to validate hmi design for increasing user’s trust in autonomous vehicle
(2021) Computer-Aided Design and Applications, 18, pp. 502-518

Kuriakose S., Parenti P., Annoni M.
Micro extrusion of high aspect ratio bi-lumen tubes using 17-4PH stainless steel feedstock
(2020) Journal of Manufacturing Processes, 58, pp. 443-457

Quadrelli D.E., Riva E., Cazzulani G., Braghin F.
Omindirectional non-reciprocity via 2d modulated radial sonic crystals
(2020) Crystals, 10, pp. 1-12

Ma D., Elmahdy A., Verleysen P., Giglio M., Manes A.
A cohesive-based method to bridge the strain rate effect and defects of RTM-6 epoxy resin under tensile loading
(2020) Procedia Structural Integrity, 28, pp. 1193-1203

Rossoni M., Bolzan P., Colombo G., Bordegoni M., Carulli M.
Survey of digital tools for the generation of ideas
(2020) Proceedings of the ASME Design Engineering Technical Conference, 9, art. no. V009T09A066

Sajedi Z., Casati R., Poletti M.C., Skalon M., Sommitsch C., Vedani M.
Thermo-mechanical fatigue behaviour of AlSi7Mg alloy processed by selective laser melting
(2019) Euro PM 2019 Congress and Exhibition,

Galbusera F., Demir A.G., Platl J., Turk C., Schnitzer R., Previtali B.
Processability and cracking behaviour of novel high-alloyed tool steels processed by Laser Powder Bed Fusion
(2022) Journal of Materials Processing Technology, 302, art. no. 117435

Gao S., Han Q., Zhou N., Pennacchi P., Chatterton S., Qing T., Zhang J., Chu F.
Experimental and theoretical approaches for determining cage motion dynamic characteristics of angular contact ball bearings considering whirling and overall skidding behaviors
(2022) Mechanical Systems and Signal Processing, 168, art. no. 108704

Zong G., Wang Y., Karimi H.R., Shi K.
Observer-based adaptive neural tracking control for a class of nonlinear systems with prescribed performance and input dead-zone constraints
(2022) Neural Networks, 147, pp. 126-135

Demir A.G., Kim J., Caltanissetta F., Hart A.J., Tasan C.C., Previtali B., Colosimo B.M.
Enabling multi-material gradient structure in laser powder bed fusion
(2022) Journal of Materials Processing Technology, 301, art. no. 117439

Platl J., Bodner S., Hofer C., Landefeld A., Leitner H., Turk C., Nielsen M.-A., Demir A.G., Previtali B., Keckes J., Schnitzer R.
Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
(2022) Acta Materialia, 225, art. no. 117570

Kanyilmaz A., Demir A.G., Chierici M., Berto F., Gardner L., Kandukuri S.Y., Kassabian P., Kinoshita T., Laurenti A., Paoletti I., du Plessis A., Razavi S.M.J.
Role of metal 3D printing to increase quality and resource-efficiency in the construction sector
(2022) Additive Manufacturing, 50, art. no. 102541

Pourheidar A., Patriarca L., Madia M., Werner T., Beretta S.
Progress in the measurement of the cyclic R-curve and its application to fatigue assessment
(2022) Engineering Fracture Mechanics, 260, art. no. 108122

Scazzosi R., Brejão de Souza S.D., Amico S.C., Giglio M., Manes A.
Experimental and numerical evaluation of the perforation resistance of multi-layered alumina/aramid fiber ballistic shield impacted by an armor piercing projectile
(2022) Composites Part B: Engineering, 230, art. no. 109488

Romano T., Migliori E., Mariani M., Lecis N., Vedani M.
Densification behaviour of pure copper processed through cold pressing and binder jetting under different atmospheres
(2022) Rapid Prototyping Journal,

Karimi H.R., Wang N., Man Z.
Learning-based robust control methodologies under information constraints
(2022) International Journal of Robust and Nonlinear Control,

Yang D., Karimi H.R., Gelman L.
A Fuzzy Fusion Rotating Machinery Fault Diagnosis Framework Based on the Enhancement Deep Convolutional Neural Networks
(2022) Sensors, 22, art. no. 671

Kaljevic A., Demir A.G.
Influence of shielding gas flow on the µLMWD of biodegradable Mg alloy and permanent stainless steel for additive manufacturing of biomedical implants
(2022) International Journal of Advanced Manufacturing Technology,

Casati R., Vedani M.
Effect of Cu content on hot-crack resistance of Al-Cu-Mg alloys produced by laser powder bed fusion
(2022) Philosophical Magazine Letters,

Mastinu G., Solari L.
Electric and biomethane-fuelled urban buses: comparison of environmental performance of different powertrains
(2022) International Journal of Life Cycle Assessment,

Abdelwahed M., Casati R., Larsson A., Petrella S., Bengtsson S., Vedani M.
On the Recycling of Water Atomized Powder and the Effects on Properties of L-PBF Processed 4130 Low-Alloy Steel
(2022) Materials, 15, art. no. 336

Casati R., Vedani M., Volpp J.
Design and Characterization of Al–Mg–Si–Zr Alloys with Improved Laser Powder Bed Fusion Processability
(2022) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 53, pp. 331-343

Ballo F., Carboni M., Mastinu G., Previati G.
Wires for spring construction: full scale fatigue experimental tests
(2022) Meccanica, 57, pp. 213-228

Gavazzoni M., Foletti S., Pasini D.
Cyclic response of 3D printed metamaterials with soft cellular architecture: The interplay between as-built defects, material and geometric non-linearity
(2022) Journal of the Mechanics and Physics of Solids, 158, art. no. 104688

Xiao H., Zhu Q., Karimi H.R.
Stability of stochastic delay switched neural networks with all unstable subsystems: A multiple discretized Lyapunov-Krasovskii functionals method
(2022) Information Sciences, 582, pp. 302-315

Wang Z., Suo T., Manes A.
Effect of chemical strengthening residual stress on the flexural performance and fracture behavior of aluminosilicate glass
(2021) Engineering Fracture Mechanics, 258, art. no. 108104

Lima R.A.A., Perrone R., Carboni M., Bernasconi A.
Experimental analysis of mode I crack propagation in adhesively bonded joints by optical backscatter reflectometry and comparison with digital image correlation
(2021) Theoretical and Applied Fracture Mechanics, 116, art. no. 103117

Gavazzoni M., Pisati M., Beretta S., Foletti S.
Multiaxial static strength of a 3D printed metallic lattice structure exhibiting brittle behavior
(2021) Fatigue and Fracture of Engineering Materials and Structures, 44, pp. 3499-3516

Mombelli D., Gonçalves D.L., Mapelli C., Barella S., Gruttadauria A.
Processing and Characterization of Self-Reducing Briquettes Made of Jarosite and Blast Furnace Sludges
(2021) Journal of Sustainable Metallurgy, 7, pp. 1603-1626

Li Z., Gariboldi E.
On the use of effective thermophysical properties to predict the melting process of composite phase change materials with coarse structures
(2021) International Journal of Heat and Mass Transfer, 180, art. no. 121765

Martulli L.M., Barriga Ruiz P., Rajan A., Bárnik F., Sága M., Bernasconi A.
Infill shape effects on bending stiffness of additively manufactured short fibre reinforced polymer sandwich specimens
(2021) Journal of Reinforced Plastics and Composites, 40, pp. 927-938

Vescovini A., Balen L., Scazzosi R., da Silva A.A.X., Amico S.C., Giglio M., Manes A.
Numerical investigation on the hybridization effect in inter-ply S2-glass and aramid woven composites subjected to ballistic impacts
(2021) Composite Structures, 276, art. no. 114506

Massocchi D., Riboni G., Lecis N., Chatterton S., Pennacchi P.
Tribological Characterization of Polyether Ether Ketone (PEEK) Polymers Produced by Additive Manufacturing for Hydrodynamic Bearing Application
(2021) Lubricants, 9, art. no. 112

Belloli F., Demir A.G., Previtali B.
Understanding the deformation mechanisms of horizontal internal channels during the LPBF of 18Ni300 maraging steel
(2021) Journal of Manufacturing Processes, 71, pp. 237-248

Karimi H.R.
Editorial special issue on recent developments in deep neural networks for intelligent mechatronics
(2021) Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 235, pp. 1731-1732

Karimi H.R.
Guest Editorial: Special issue on recent technological innovations in automation and control systems for marine vehicles
(2021) Control Engineering Practice, 116, art. no. 104928

Sajedi Z., Casati R., Poletti M.C., Wang R., Iranshahi F., Vedani M.
Comparative thermal fatigue behavior of AlSi7Mg alloy produced by L-PBF and sand casting
(2021) International Journal of Fatigue, 152, art. no. 106424

Petrò S., Pagani L., Moroni G., Scott P.J.
Conformance and nonconformance in segmentation-free X-ray computed tomography geometric inspection
(2021) Precision Engineering, 72, pp. 25-40

Barricelli L., Beretta S.
Analysis of prospective SIF and shielding effect for cylindrical rough surfaces obtained by L-PBF
(2021) Engineering Fracture Mechanics, 256, art. no. 107983

Li B., Lu Y., Karimi H.R.
Adaptive fading extended kalman filtering for mobile robot localization using a doppler–azimuth radar
(2021) Electronics (Switzerland), 10, art. no. 2544

Bertolini M., Rossoni M., Colombo G.
Operative workflow from ct to 3d printing of the heart: Opportunities and challenges
(2021) Bioengineering, 8, art. no. 130

Pisati M., Corneo M.G., Beretta S., Riva E., Braghin F., Foletti S.
Numerical and experimental investigation of cumulative fatigue damage under random dynamic cyclic loads of lattice structures manufactured by laser powder bed fusion
(2021) Metals, 11, art. no. 1395

Gao S., Chatterton S., Pennacchi P., Chu F.
Behaviour of an angular contact ball bearing with three-dimensional cubic-like defect: A comprehensive non-linear dynamic model for predicting vibration response
(2021) Mechanism and Machine Theory, 163, art. no. 104376

Bertoli L., Caltanissetta F., Colosimo B.M.
In-situ Quality Monitoring of Extrusion-based Additive Manufacturing via Random Forests and clustering
(2021) IEEE International Conference on Automation Science and Engineering, 2021-August, pp. 2057-2062

Berardengo M., Manzoni S., Thomas O., Giraud-Audine C., Drago L., Marelli S., Vanali M.
The reduction of operational amplifier electrical outputs to improve piezoelectric shunts with negative capacitance
(2021) Journal of Sound and Vibration, 506, art. no. 116163

Carasi G., Yu B., Hutten E., Zurob H., Casati R., Vedani M.
Effect of Heat Treatment on Microstructure Evolution of X38CrMoV5-1 Hot-Work Tool Steel Produced by L-PBF
(2021) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52, pp. 2564-2575

Cacace S., Semeraro Q.
Improvement of SLM Build Rate of A357 alloy by optimizing Fluence
(2021) Journal of Manufacturing Processes, 66, pp. 115-124

Yang D., Sun K.
A CAE-Based Deep Learning Methodology for Rotating Machinery Fault Diagnosis
(2021) 2021 7th International Conference on Control, Automation and Robotics, ICCAR 2021, -396

Volpp J., Casati R.
Fluctuations of tracks and layers during aluminium laser powder-bed fusion
(2021) Applied Sciences (Switzerland), 11, art. no. 3132

Petrò S., Reina C., Moroni G.
X-ray CT-Based Defect Evaluation of Continuous CFRP Additive Manufacturing
(2021) Journal of Nondestructive Evaluation, 40, art. no. 7

Arrigoni S., Braghin F., Cheli F.
MPC trajectory planner for autonomous driving solved by genetic algorithm technique
(2021) Vehicle System Dynamics,

Karimi H.R., Wang N., Jin X., Zemouche A.
Guest Editorial: Special issue on neural networks-based reinforcement learning control of autonomous systems
(2021) Neurocomputing,

Wang Z., Manes A.
Investigation of the biaxial flexural fracture of aluminosilicate glass by smeared fixed crack method
(2021) Procedia Structural Integrity, 33, pp. 337-346

Previati G., Gobbi M.
Test bench for characterization and durability tests of motorbike clutches
(2021) Proceedings of the ASME Design Engineering Technical Conference, 1, art. no. V001T01A013

Mei P., Karimi H.R., Yang S., Xu B., Huang C.
An adaptive fuzzy sliding-mode control for regenerative braking system of electric vehicles
(2021) International Journal of Adaptive Control and Signal Processing,

Cacace S., Semeraro Q.
Fast optimisation procedure for the selection of L-PBF parameters based on utility function
(2021) Virtual and Physical Prototyping,

Chatterton S., Pennacchi P., Vania A., Dang P.V.
Optimization of an oil film journal bearing for temperature reduction
(2021) Proceedings of the ASME Turbo Expo, 9A-2021, art. no. V09AT24A023

Yang D., Karimi H.R., Sun K.
CNN-based early classification of rotating machinery fault diagnosis
(2021) 17th International Conference on Condition Monitoring and Asset Management, CM 2021,

Li Z., Gariboldi E.
Analysis of the applicability of effective thermophysical properties to composite phase change materials
(2021) Materials Science Forum, 1016 MSF, pp. 813-818

Pennacchi P., Chatterton S., Vania A.
Diagnostics of Roller Bearings Faults During Long-Lasting Tests
(2021) Mechanisms and Machine Science, 91, pp. 687-698

Petrò S., Moroni G.
3D Identification of Face and Flank in Micro-mills for Automatic Measurement of Rake Angle
(2020) Nanomanufacturing and Metrology, 3, pp. 151-163

Zhang Z., Kong L., Niu Y., Liang Z.
Modification of gesture-determined-dynamic function with consideration of margins for motion planning of humanoid robots
(2020) Filomat, 34, pp. 5033-5048

Pigazzi R., Confalonieri C., Rossoni M., Gariboldi E., Colombo G.
Ontologies as a tool for design and material engineers
(2020) ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 6, art. no. 0

Pennacchi P., Cazzulani G., Silva A.
Modal analysis of turbine blades by means of distributed optical fiber sensors
(2020) Proceedings of the ASME Turbo Expo, 11, art. no. 0

Hamidi Nasab M., Loge R., Casati R., Boillat E., Vedani M.
A study on the surface features of the SLM processed parts and their journey to become bulk defects
(2019) Euro PM 2019 Congress and Exhibition,

Bengtsson S., Casati R., Larsson A., Riccio M., Abdelwahed M., Vedani M.
Design of structural low-alloy steels for laser-powder bed fusion
(2019) Euro PM 2019 Congress and Exhibition,

Deirmina F., Davies P.A., Casati R.
Effects of Powder Atomization Route and Post-Processing Thermal Treatments on the Mechanical Properties and Fatigue Resistance of Additively Manufactured 18Ni300 Maraging Steel
(2021) Advanced Engineering Materials,

Casati R., Coduri M., Riccio M., Rizz, A., Vedani M.
Development of a high strength Al–Zn–Si–Mg–Cu alloy for selective laser melting
(2019) Journal of Alloys and Compounds, 801, pp. 243-253

Oliveira de Menezes J.T., Castrodeza E.M., Casati R.
Effect of build orientation on fracture and tensile behavior of A357 Al alloy processed by Selective Laser Melting
(2019) Materials Science and Engineering A, 766, art. no. 138392

Bengtsson S., Casati R., Larsson A., Riccio M., Abdelwahed M., Vedani M.
Design of structural low-alloy steels for laser-powder bed fusion
(2019) Euro PM 2019 Congress and Exhibition,

Gariboldi E., Colombo L.P.M., Fagiani D., Li Z.
Methods to Characterize the Effective Thermal Conductivity, Diffusivity and Thermal Response in Different Classes of Composite Phase Change Materials
(2019) Materials, 12, art. no. 2552

Confalonieri C., Li Z., Gariboldi E.
Metallic form-stable phase change materials for thermal energy storage and management: general features and effect of manufacturing process on thermal response and stability
(2020) La Metallurgia Ital. Int J. Ilat. Assoc. Metall., 7, pp. 12-20

Li Z., Gariboldi E.
Reliable estimation of effective thermal properties of a 2-phase material by its optimized modelling in view of Lattice Monte Carlo simulation
(2019) Computational Materials Science, 169, art. no. 109125

Confalonieri C., Perrin M., Gariboldi E.
Combined powder metallurgy routes to improve thermal and mechanical response of Al-Sn composite Phase Change Materials
(2020) Trans. Nonferrous Met. Soc. China, 30, pp. 3226-3239